![background image](http://html1.mh-extra.com/html/smc-networks/7500a-vcp-annexe-1/7500a-vcp-annexe-1_management-manual_1299753260.webp)
C
OMMAND
L
INE
I
NTERFACE
3-124
Priority Commands
The commands described in this section allow you to specify which data
packets have greater precedence when traffic is buffered in the switch due
to congestion. This switch supports CoS with four priority queues for each
port. Data packets in a port’s high-priority queue will be transmitted before
those in the lower-priority queues. You can set the default priority for each
interface, the relative weight of each queue, and the mapping of frame
priority tags to the switch’s priority queues.
Command
Function
Mode
Page
Layer 2 Priority Commands
switchport priority
default
Sets a port priority for incoming
untagged frames
IC
3-125
queue bandwidth
Assigns round-robin weights to the
priority queues
GC 3-126
queue cos map
Assigns class of service values to the
priority queues
IC 3-127
show queue
bandwidth
Shows round-robin weights assigned to
the priority queues
PE
3-129
show queue
cos-map
Shows the class of service map
PE
3-129
show interfaces
switchport
Displays the administrative and
operational status of an interface
PE
3-78
Layer 3 and 4 Priority Commands
map ip port
Enables TCP/UDP class of service
mapping
GC
3-130
map ip port
Maps TCP/UDP socket to a class of
service
IC
3-131
map ip precedence Enables IP precedence class of service
mapping
GC
3-131
map ip precedence Maps IP precedence value to a class of
service
IC
3-132
map ip dscp
Enables IP DSCP class of service
mapping
GC
3-133
map ip dscp
Maps IP DSCP value to a class of service IC
3-134
Summary of Contents for 7500A/VCP - annexe 1
