P
ORT
T
RUNKING
C
OMMANDS
3-143
Command Usage
• The uplink ports can be trunked together.
• The VDSL ports can be trunked together.
• All links in a trunk must operate at the same data rate and duplex
mode.
Example
The following example creates trunk 1 and then adds port 11:
show interfaces status port-channel
Use this command to show trunk information.
Syntax
show interfaces status port-channel [
port channel number
]
port channel number
- Number of the trunk to show.
Default Setting
No default
Command Mode
Privileged EXEC
Console(config)#interface port-channel 1
Console(config-if)#exit
Console(config)#interface ethernet 1/11
Console(config-if)#channel-group 1
Console(config-if)#
Summary of Contents for 7500A/VCP - annexe 1
