SMC Networks 7500A/VCP - annexe 1, Management Manual

Page: 230 / 316

C
OMMAND
L
INE
I
NTERFACE
3-94
show bridge group
Use this command to show the spanning tree configuration.
Syntax
show bridge group bridge-group [ interface ]
• bridge-group - Bridge group index (bridge 1.)
• interface
• ethernet unit / port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show bridge group 1 ethernet 1/11
Bridge-group information
--------------------------------------------------------
Spanning tree protocol :ieee8021d
Spanning tree enable/disable :enable
Priority :32768
Hello Time (sec.) :2
Max Age (sec.) :20
Forward Delay (sec.) :15
Designated Root :32768.0000e9000066
Curent root :0
Curent root cost :0
Number of topology changes :1
Last topology changes time (sec.):2167
Hold times (sec.) :1
--------------------------------------------------------
Eth 1/11 information
--------------------------------------------------------
Admin status : enable
STA state : broken
Path cost : 18
Priority : 128
Designated cost : 0
Designated port : 128.11
Designated root : 40000.123412341234
Designated bridge :32768.0000e9000066
Fast forwarding :disable
Forward transitions :0
Console#