SMC Networks 7500A/VCP - annexe 1, Management Manual

Page: 282 / 316

C
OMMAND
L
INE
I
NTERFACE
3-146
VDSL Commands
These commands are used to to configure and display communication
parameters for VDSL and Ethernet ports on the switch and connected
CPEs.
Note: The term EFM used in this section stands for Ethernet in the First
Mile. The “first mile” is the connection between business and
residential users and the public network. The Extended Ethernet
switch uses VDSL-based technology for this connection.
Command Function Mode Page
efm profile global Batch assigns profiles for speed to all the
VDSL ports on the switch
GC 3-147
efm profile Assigns profiles for speed to individual VDSL
ports
IC 3-149
efm define
user-profile
Configures downstream rate, upstream rate,
and interleave depth for user-specified
profiles
GC 3-150
efm reset Resets the switch VDSL chipset or, if a CPE
is connected, the CPE VDSL chipset
IC 3-151
efm shutdown Disables the VDSL chipset transmitter of an
efm port that not being used.
PE 3-151
efm rdl Enables/disables Remote Digital Loopback
(RDL) mode.
IC 3-152
efm flow-control Configures the maximum speed of
transmission of data from a specific switch
VDSL port to the CPE.
IC 3-153
show controllers
ethernet-
controller
Displays the Ethernet link transmit and
receive statistics on a specific VDSL port.
PE 3-154
show controllers
efm interface-id
actual
Displays the current values of the VDSL link
on a specific VDSL port.
PE 3-156
show controllers
efm interface-id
admin
Displays the administrative settings of the
VDSL link on a specific VDSL port.
PE 3-157