![background image](http://html1.mh-extra.com/html/smc-networks/7500a-vcp-annexe-1/7500a-vcp-annexe-1_management-manual_1299753124.webp)
C
ONFIGURING
THE
S
WITCH
2-96
Web Interface
Click Rate Limit/Rate Limit Status to enable/disable this feature globally.
Then click Rate Limit Port Configuration or Rate Limit Trunk
Configuration to configure the rate limit for individual ports or trunks.
Command Line Interface
Use the
rate-limit input
command in Global configuration mode to turn
on rate limit. Use the
no
form of this command to disable it.
Use the
rate limit input
command in Interface Configuration mode to
configure the rate limit on data received on a specific port. Use the
no
form of this command to return to default. In the example below, port 1 is
configured to have a rate limit of 10 Mbps.
Console#config
Console(config)#rate-limit input
3-163
Console(config)#
Console(config)#interface ethernet 1/1
Console(config-if)#rate-limit input 10
3-164
Console(config-if)#
Summary of Contents for 7500A/VCP - annexe 1
