10/100Base-TX Industrial Ethernet Extender
1
This quick start guide describes how to install and use the Ethernet Extender. The Ethernet
Extender introduced here provides one channel for Ethernet over existing voice grade copper
wire.
Product Overview
Product Features
y
One 10/100BaseTX (TX) Ethernet port with RJ-45 connector
y
Auto negotiation of speed and duplex mode on TX port
y
Auto MDIX on TX port
y
Complies with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX standards
y
One Ethernet Extender port with RJ-11 connector
y
Ethernet Extender port auto senses the speed of 1/3/5/10/15/20/25/30/40/50Mbps
y
One DIP switch for configuring Ethernet Extender local or remote mode
y
Status LEDs
y
External AC to DC power adapter
y
Used as a stand-alone device or with a chassis
y
Hot-swappable when used with a chassis
Packing List
When you unpack this product package, you will find the items listed below. Please inspect the contents, and report
any apparent damage or missing items immediately to our authorized reseller.
y
The Ethernet Extender
y
User’s Manual
y
AC to DC Power Adaptor
Ethernet Extender Mode Settings
Ethernet Extender mode settings are made very simple by means of a switch at the rear panel of the Ethernet
Extender. The switch has two positions for Ethernet Extender mode settings. Refer to the table below for more
details. One device must be set to Loc and the other to Rmt when two devices are connected.
Loc Rmt
The device operates in local mode
The device operates in remote mode
