B
ASIC
C
ONFIGURATION
2-19
the length of file name should be 1 to 31. (Valid characters: A-Z, a-z,
0-9, “.”, “-”, “_”)
•
The maximum number of user-defined configuration files is 2.
You can save the configuration file under a new file name and then set it as
the startup file, or you can specify the current startup configuration file as
the destination file to directly replace it. Note that
“Factory_Default_Config.cfg” can be copied to the TFTP server, but
cannot be used as the destination on the switch.
Web Interface
Click System/Configuration. Enter the IP address of the TFTP server,
enter the name of the file to download, select a file on the switch to
overwrite or specify a new file name, and click “Transfer from Server.”
Command Line Interface
Enter the IP address of the TFTP server, specify the source file on the
server, set the startup file name on the switch, and then restart the switch.
Console#copy tftp startup-config
3-19
TFTP server ip address: 10.1.0.15
Source configuration file name: config2
Startup configuration file name [startup] : config2
/
Console#
Summary of Contents for 7500A/VCP - annexe 1
