VLAN C
OMMANDS
3-97
Example
Related Commands
show vlan
vlan
Use this command to configure a VLAN. Use the
no
form to restore the
default settings or delete a VLAN.
Syntax
vlan
vlan-id
[
name
vlan-name
]
media ethernet
[
state
{
active
|
suspend
}]
no vlan
vlan-id
[
name
|
state
]
•
vlan-id
- ID of configured VLAN. (Range: 1-4094, no leading
zeroes)
•
name
- Keyword to be followed by the VLAN name.
•
vlan-name
- ASCII string from 1 to 32 characters.
•
media ethernet
- Ethernet media type.
•
state
- Keyword to be followed by the VLAN state.
-
active
- VLAN is operational.
-
suspend
- VLAN is suspended. Suspended VLANs do not
pass packets.
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
• When
no vlan
vlan-id
is used, the VLAN is deleted.
• When
no vlan
vlan-id
name
is used, the VLAN name is removed.
• When
no vlan
vlan-id
state
is used, the VLAN returns to the default
state (i.e., active.)
Console(config)#vlan database
Console(config-vlan)#
Summary of Contents for 7500A/VCP - annexe 1
