![background image](http://html1.mh-extra.com/html/smc-networks/7500a-vcp-annexe-1/7500a-vcp-annexe-1_management-manual_1299753301.webp)
A-1
A
PPENDIX
A
T
ROUBLESHOOTING
Troubleshooting Chart
Troubleshooting Chart
Symptom
Action
Cannot connect using
Telnet, Web browser,
or SNMP software
• Be sure you have configured the agent with a valid IP
address, subnet mask and default gateway.
• Be sure that your management station has management
VLAN access to the switch (default is VLAN 1).
• Check that you have a valid network connection to the
switch and that the port you are using has not been
disabled.
• Check network cabling between the management station
and the switch.
• If you cannot connect using Telnet, there may already be
four active sessions. Try connecting again at a later time.
Cannot access
the on-board
configuration
program via a serial
port connection
• Be sure you have set the terminal emulator program to
VT100 compatible, 8 data bits, 1 stop bit, no parity, and
9600 bps.
• Check that the null-modem serial cable conforms to the
pin-out connections provided in Appendix B.
Summary of Contents for 7500A/VCP - annexe 1
