![background image](http://html1.mh-extra.com/html/smc-networks/7500a-vcp-annexe-1/7500a-vcp-annexe-1_management-manual_1299753215.webp)
A
DDRESS
T
ABLE
C
OMMANDS
3-79
Address Table Commands
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
Note:
The access mode shown in the table is indicated by these
abbreviations:
NE
(Normal Exec),
PE
(Privileged Exec),
GC
(Global Configuration),
IC
(Interface Configuration),
LC
(Line Configuration),
VC
(VLAN Database Configuration.)
bridge address
Use this command to map a static address to a port in a VLAN. Use the
no
form to remove an address.
Syntax
bridge
bridge-group
address
mac-address
vlan
vlan-id
forward
interface
[
action
]
no bridge
bridge-group
address
mac-
address
vlan
vlan-id
Command
Function
Mode Page
bridge address
Maps a static address to a port in a VLAN
GC
3-79
show bridge
Displays classes of entries in the
bridge-forwarding database
PE
3-81
clear bridge
Removes any learned entries from the
forwarding database and clears the transmit
and receive counts for any statically or system
configured entries
PE
3-82
bridge-group
aging-time
Sets the aging time of the address table
GC
3-82
show bridge
aging-time
Shows the aging time for the address table
PE
3-83
Summary of Contents for 7500A/VCP - annexe 1
