C
OMMAND
L
INE
I
NTERFACE
3-26
System Management Commands
These commands are used to control system logs, passwords, user name,
browser configuration options, and display or configure a variety of other
system information.
Command
Function
Mode
Page
Device Description Command
hostname
Specifies or modifies the host name for
the device
GC
3-27
User Access Commands
enable password
Sets a password to control access to the
privileged mode from the normal mode
GC
3-29
Web Server Commands
ip http port
Specifies the port to be used by the Web
browser interface
GC
3-30
ip http server
Allows the switch to be monitored or
configured from a browser
GC
3-31
Event Logging Commands
logging on
Controls logging of error messages
GC
3-31
logging history
Limits syslog messages sent to the
SNMP network management station
based on severity
GC
3-32
clear logging
Clears messages from the logging buffer PE
3-33
show logging
Displays the state of logging
PE
3-34
System Status Commands
show startup-config Displays the contents of the
configuration file (stored in Flash
memory) that is used to start up the
system
PE
3-35
show running-config Displays the configuration data currently
in use
PE
3-36
show system
Displays system information
NE, PE 3-37
Summary of Contents for 7500A/VCP - annexe 1
