SMC Networks 7500A/VCP - annexe 1, Management Manual

Page: 61 / 316

A
DDRESS
T
ABLE
S
ETTINGS
2-33
Command Line Interface
Specify the required interface, then enter “Port Security.” To disable this
feature enter “No Port Security.”
Address Table Settings
The switch stores the addresses of known devices. This information is
used to route traffic directly between the inbound and outbound ports.
The addresses learned by monitoring traffic are stored in the dynamic
address table. You may also manually configure static addresses that are
bound to a specific port.
Displaying the Address Table
The Dynamic Address Table contains the MAC addresses learned by
monitoring the source address of traffic entering the switch. When the
destination address for inbound traffic is found in the database, packets
intended for that address are forwarded directly to the associated port.
Otherwise, the traffic is broadcast to all ports.
Command Usage
• Display entries in the dynamic address table by selecting an interface
(either port or trunk), MAC address, or VLAN.
• Sort the information displayed based on interface (port or trunk), MAC
address, or VLAN.
Web Interface
Click Address Table/Dynamic Addresses. Specify the search type
(i.e., Interface, MAC Address, or VLAN), the method of sorting the
displayed addresses, and then click “Query.”
Console(config)#interface ethernet 1/1 3-69
Console(config-if)#port security 3-84
Console(config-if)#