![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175251.webp)
SNMP C
OMMANDS
3-63
Example
Related Commands
snmp-server contact (3-63)
snmp-server host
Use this command to specify the recipient of a Simple Network
Management Protocol notification operation. Use the
no
form to remove
the specified host.
Syntax
snmp-server host
{host-addr
community-string
}
[
version 1
|
2c
]
no snmp-server host
host-addr
•
host-addr
- Internet address of the host (the targeted recipient).
(Maximum host addresses: 5 trap destination IP address entries)
•
community-string
- Password-like community string sent with the
notification operation. Although you can set this string using the
snmp-server host
command by itself, we recommend that you
define this string using the
snmp-server community
command
prior to using the
snmp-server host
command. (Maximum
length: 32 characters)
•
version
- Specifies whether to send notifications as SNMP v1 or
SNMP v2c traps.
Default Setting
Host Address: None
SNMP Version: 1
Command Mode
Global Configuration
Command Usage
• If you do not enter an
snmp-server host
command, no
Console(config)#snmp-server location WC-19
Console(config)#
Summary of Contents for 6724AL2
