![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175261.webp)
IP I
NTERFACE
C
OMMANDS
3-73
Command Usage
• Use the
ping
command to see if another site on the network can be
reached.
• Following are some results of the
ping
command:
-
Normal response
-The normal response occurs in one to ten seconds,
depending on network traffic.
-
Destination does not respond
- If the host does not respond, a “timeout”
appears in ten seconds.
-
Destination unreachable
- The gateway for this destination indicates that
the destination is unreachable.
-
Network or host unreachable
- The gateway found no corresponding entry
in the route table.
• Press <Esc> to stop pinging.
Example
Console#ping 10.1.0.9
Type ESC to abort.
PING to 10.1.0.9, by 5 32-byte payload ICMP packets, timeout is 5
seconds
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 0 ms
Ping statistics for 10.1.0.9:
5 packets transmitted, 5 packets received (100%), 0 packets lost (0%)
Approximate round trip times:
Minimum = 0 ms, Maximum = 10 ms, Average = 8 ms
Console#
Summary of Contents for 6724AL2
