![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175201.webp)
G
ENERAL
C
OMMANDS
3-13
Syntax
enable
[
level
]
level
- Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
• “super” is the default password required to change the command mode
from Normal Exec to Privileged Exec. (To set this password, see the
enable password
command on page 3-29.)
• The “#” character is appended to the end of the prompt to indicate
that the system is in privileged access mode.
Example
Related Commands
disable (3-13)
enable password (3-29)
disable
Use this command to return to Normal Exec mode from privileged mode.
In normal access mode, you can only display basic information on the
switch's configuration or Ethernet statistics. To gain access to all
commands, you must use the privileged mode. See “Understanding
Command Modes” on page 3-6.
Console> enable
Password: [privileged level password]
Console#
Summary of Contents for 6724AL2
