![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175262.webp)
C
OMMAND
L
INE
I
NTERFACE
3-74
Line Commands
You can access the onboard configuration program by attaching a VT100
compatible device to the server’s serial port. These commands are used to
set communication parameters for the serial port or Telnet (i.e., a virtual
terminal).
line
Use this command to identify a specific line for configuration, and to
process subsequent line configuration commands.
Command
Function
Mode Page
line
Identifies a specific line for configuration and
starts the line configuration mode
GC
3-75
login
Enables password checking at login
LC
3-76
password
Specifies a password on a line
LC
3-78
exec-timeout
Sets the interval that the command interpreter
waits until user input is detected
LC
3-79
password-thresh Sets the password intrusion threshold, which
limits the number of failed logon attempts
LC
3-80
silent-time*
Sets the amount of time the management
console is inaccessible after the number of
unsuccessful logon attempts exceeds the
threshold set by the
password-thresh
command
LC
3-81
databits*
Sets the number of data bits per character that
are interpreted and generated by hardware
LC
3-81
parity*
Defines the generation of a parity bit
LC
3-82
speed*
Sets the terminal baud rate
LC
3-83
stopbits*
Sets the number of the stop bits transmitted per
byte
LC
3-84
show line
Displays a terminal line's parameters
NE,
PE
3-84
* These commands only apply to the serial port.
Summary of Contents for 6724AL2
