![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175052.webp)
C
ONFIGURING
THE
S
WITCH
2-20
Command Attributes
•
System Log Status
– Enables/disables the logging of debug or error
messages to the logging process.
•
Flash Level
– Limits log messages saved to the switch’s permanent
flash memory for all levels up to the specified level. For example, if
level 3 is specified, all messages from level 0 to level 3 will be logged to
flash.
•
RAM Level
– Limits log messages saved to the switch’s temporary
RAM memory for all levels up to the specified level. For example, if
level 7 is specified, all messages from level 0 to level 7 will be logged to
RAM.
Note:
The Flash Level must be equal to or less than the Ram Level.
Web
– Click System, Log, System Logs. Specify System Log Status, then
change the level of messages, and click Apply.
CLI
– Specify the hostname, location and contact information.
Console(config)#logging on
3-31
Console(config)#logging history ram 0
3-31
Console(config)#
Console#show logging flash
3-36
Syslog logging: Disable
History logging in FLASH: level errors
Console#
Summary of Contents for 6724AL2
