![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175103.webp)
T
RUNK
C
ONFIGURATION
2-71
Statically Configuring a Trunk
Command Usage
•
When configuring static trunks, you may not be able to link switches
of different types, depending on the manufacturer’s implementation.
However, note that the static trunks on this switch are Cisco
EtherChannel compatible.
•
To avoid creating a loop in the network, be sure you add a static trunk
via the configuration interface before connecting the ports, and also
disconnect the ports before removing a static trunk via the
configuration interface.
Web
– Click Port, Trunk Membership. Enter a trunk ID of 1-4 in the
Trunk field, select any of the switch ports from the scroll-down port list,
and click Add. After you have completed adding ports to the member list,
click Apply.
Summary of Contents for 6724AL2
