![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175267.webp)
L
INE
C
OMMANDS
3-79
password-thresh
Use this command to set the password intrusion threshold which limits the
number of failed logon attempts. Use the
no
form to remove the
threshold value.
Syntax
password-thresh
threshold
no password-thresh
threshold
- The number of allowed password attempts.
(Range: 1-120; 0: no threshold)
Default Setting
The default value is three attempts.
Command Mode
Line Configuration
Command Usage
• When the logon attempt threshold is reached, the system interface
becomes silent for a specified amount of time before allowing the next
logon attempt. (Use the
silent-time
command to set this interval.)
When this threshold is reached for Telnet, the Telnet logon interface
shuts down.
• This command applies to both the local console and Telnet
connections.
Example
To set the password threshold to five attempts, enter this command:
Related Commands
silent-time (3-81)
Console(config-line)#password-thresh 5
Console(config-line)#
Summary of Contents for 6724AL2
