![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175020.webp)
S
WITCH
M
ANAGEMENT
1-4
2.
Refer to “Line Commands” on page 3-74 for a complete
description of console configuration options.
3.
Once you have set up the terminal correctly, the console login
screen will be displayed.
For a description of how to use the CLI, see “Using the Command Line
Interface” on page 3-1. For a list of all the CLI commands and detailed
information on using the CLI, refer to “Command Groups” on page 3-10.
Remote Connections
Prior to accessing the switch’s onboard agent via a network connection,
you must first configure it with a valid IP address, subnet mask, and default
gateway using a console connection, DHCP or BOOTP protocol.
The IP address for this switch is assigned via DHCP by default. To
manually configure this address or enable dynamic address assignment via
DHCP or BOOTP, see “Setting an IP Address” on page 1-6.
Note:
This switch supports four concurrent Telnet sessions.
After configuring the switch’s IP parameters, you can access the onboard
configuration program from anywhere within the attached network. The
onboard configuration program can be accessed using Telnet from any
computer attached to the network. The switch can also be managed by any
computer using a Web browser (Internet Explorer 5.0 or above, or
Netscape Navigator 6.2 or above), or from a network computer using
network management software.
Note:
The onboard program only provides access to basic configuration
functions. To access the full of SNMP management functions,
you must use SNMP-based network management software.
Summary of Contents for 6724AL2
