![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175078.webp)
C
ONFIGURING
THE
S
WITCH
2-46
Command Usage
•
Note that a secure port has the following restrictions:
- It should not be connected to a network interconnection device.
- It cannot be configured as a member of a static trunk.
- It can be configured as an LACP trunk port, but the switch does not
allow the LACP trunk to be enabled.
•
A port that is already configured as an LACP or static trunk port
cannot be enabled as a secure port.
•
The default maximum number of MAC addresses allowed on a secure
port is zero. You must configure a maximum address count from 1 - 20
for the port to allow access.
Command Attributes
•
Status
– Enables or disables port security on the port.
(Default: disabled)
•
Max MAC Count
– Sets the maximum number of MAC addresses
that can be learned on a port when port security is enabled.
(Range: 0 - 20, Default: 0)
Summary of Contents for 6724AL2
