![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175196.webp)
C
OMMAND
L
INE
I
NTERFACE
3-8
Configuration Commands
Configuration commands are privileged level commands used to modify
switch settings. These commands modify the running configuration only
and are not saved when the switch is rebooted. To store the running
configuration in nonvolatile storage, use the
copy running-config
startup-config
command.
The configuration commands are organized into different modes:
•
Global Configuration - These commands modify the system level
configuration, and include commands such as
hostname
and
snmp-server community
.
•
Access Control List Configuration - These commands are used for
packet filtering.
•
DHCP Configuration - These commands are used to configure the
DHCP server.
•
Interface Configuration - These commands modify the port
configuration such as
speed-duplex
and
negotiation
.
•
Line Configuration - These commands modify the console port and
Telnet configuration, and include commands such as
parity
and
databits
.
•
Router Configuration - These commands configure global settings for
unicast and multicast routing protocols.
Username: guest
Password: [system login password]
CLI session with the SMC6724AL2 is opened.
To end the CLI session, enter [Exit].
Console#enable
Password: [privileged level password if so configured]
Console#
Summary of Contents for 6724AL2
