![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175063.webp)
C
ONFIGURING
SNMP
2-31
Configuring SNMP
Simple Network Management Protocol (SNMP) is a communication
protocol designed specifically for managing devices on a network.
Equipment commonly managed with SNMP includes switches, routers
and host computers. SNMP is typically used to configure these devices for
proper operation in a network environment, as well as to monitor them to
evaluate performance or detect potential problems.
The switch includes an onboard agent that continuously monitors the
status of its hardware, as well as the traffic passing through its ports, based
on the Simple Network Management Protocol (SNMP). A network
management station can access this information using software such as HP
OpenView. Access rights to the onboard agent are controlled by
community strings. To communicate with the switch, the management
station must first submit a valid community string for authentication. The
options for configuring community strings and related trap functions are
described in the following sections.
Setting Community Access Strings
You may configure up to five community strings authorized for
management access. All community strings used for IP Trap Managers
should be listed in this table. For security reasons, you should consider
removing the default strings.
Command Attributes
•
SNMP Community Capability
– Indicates that the switch
supports up to five community strings.
•
Community String
– A community string that acts like a password
and permits access to the SNMP protocol. Default strings: “public”
(read-only access), “private” (read/write access). Range: 1-32
characters, case sensitive.
Summary of Contents for 6724AL2
