![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175368.webp)
C
OMMAND
L
INE
I
NTERFACE
3-180
map access-list ip
This command sets the output queue for packets matching an ACL rule.
The specified CoS value is only used to map the matching packet to an
output queue; it is not written to the packet itself. Use the
no
form to
remove the CoS mapping.
Syntax
[
no
]
map access-list ip
acl_name
cos
cos-value
•
acl_name
– Name of the ACL. (Maximum length: 16 characters)
•
cos-value
– CoS value. (Range: 0-7)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
A packet matching a rule within the specified ACL is mapped to one of
the output queues as shown in the following table. For information on
mapping the CoS values to output queues, see
queue cos-map
on
page 3-193.
Example
Related Commands
queue cos-map (3-193)
show map access-list ip (3-182)
Priority
Level
0
1
2
3
4
5
6
7
Output
Queue
1
2
0
3
4
5
6
7
Console(config)#interface ethernet 1/25
Console(config-if)#map access-list ip bill cos 0
Console(config-if)#
Summary of Contents for 6724AL2
