![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175195.webp)
E
NTERING
C
OMMANDS
3-7
The command classes and associated modes are displayed in the following
table:
Exec Commands
When you open a new console session on the switch with the user name
and password “guest,” the system enters the Normal Exec command
mode (or guest mode), displaying the “Console>” command prompt.
Only a limited number of the commands are available in this mode. You
can access all commands only from the Privileged Exec command mode
(or administrator mode). To access Privilege Exec mode, open a new
console session with the user name and password “admin.” The system
will now display the “Console#” command prompt. You can also enter
Privileged Exec mode from within Normal Exec mode, by entering the
enable
command, followed by the privileged level password “super”
(page 3-12).
To enter Privileged Exec mode, enter the following commands and
passwords:
Class
Mode
Exec
Normal
Privileged
Configuration
Global*
Interface
Line
VLAN Database
* You must be in Privileged Exec mode to access any of the configuration modes.
You must be in Global Configuration mode to access any of the other
configuration modes.
Username: admin
Password: [system login password]
CLI session with the SMC6724AL2 is opened.
To end the CLI session, enter [Exit].
Console#
Summary of Contents for 6724AL2
