![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175329.webp)
GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
3-141
• Timer values must meet the following restrictions:
- leave >= (2 x join)
- leaveall > leave
Note:
Set GVRP timers on all Layer 2 devices connected in the same
network to the same values. Otherwise, GVRP may not operate
successfully.
Example
Related Commands
show garp timer (3-142)
show garp timer
Use this command to show the GARP timers for the selected interface.
Syntax
show garp timer
[
interface
]
interface
•
ethernet
unit
/
port
-
unit
- This is device 1.
-
port
- Port number.
•
port-channel
channel-id
(Range: 1-6)
Default Setting
Shows all GARP timers.
Command Mode
Normal Exec, Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#garp timer join 100
Console(config-if)#
Summary of Contents for 6724AL2
