SMC Networks 6724AL2, Management Manual

Page: 309 / 424

VLAN C
OMMANDS
3-121
vlan database
Use this command to enter VLAN database mode. All commands in this
mode will take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete
VLANs. After finishing configuration changes, you can display the
VLAN settings by entering the
show vlan
command.
• Use the
interface vlan
command mode to define the port
membership mode and add or remove ports from a VLAN. The results
of these commands are written to the running-configuration file, and
you can display this file by entering the
show running-config
command.
Example
Related Commands
show vlan (3-131)
show interfaces
status vlan Displays status for the specified VLAN
interface NE,
PE 3-95
show interfaces
switchport Displays the administrative and operational
status of an interface NE,
PE 3-98
Console(config)#vlan database
Console(config-vlan)#
Command Function Mode Page