![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175300.webp)
C
OMMAND
L
INE
I
NTERFACE
3-112
spanning-tree cost
Use this command to configure the spanning tree path cost for the
specified interface. Use the
no
form to restore the default.
Syntax
spanning-tree
cost
cost
no spanning-tree cost
cost
- The path cost for the port. (Range: 1-200,000,000))
The recommended range is:
• Ethernet: 200,000-20,000,000
• Fast Ethernet: 20,000-2,000,000
• Gigabit Ethernet: 2,000-200,000
Default Setting
• Ethernet – half duplex: 2,000,000; full duplex: 1,000,000;
trunk: 500,000
• Fast Ethernet – half duplex: 200,000; full duplex: 100,000;
trunk: 50,000
• Gigabit Ethernet – full duplex: 10,000; trunk: 5,000
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• This command is used by the Spanning Tree Algorithm to determine
the best path between devices. Therefore, lower values should be
assigned to ports attached to faster media, and higher values assigned
to ports with slower media.
• Path cost takes precedence over port priority.
• When the spanning-tree pathcost method (page 3-111) is set to short,
the maximum value for path cost is 65,535.
Summary of Contents for 6724AL2
