![background image](http://html1.mh-extra.com/html/smc-networks/6724al2/6724al2_management-manual_1300175305.webp)
S
PANNING
T
REE
C
OMMANDS
3-117
spanning-tree link-type
Use this command to configure the link type for Rapid Spanning Tree. Use
the
no
form to restore the default.
Syntax
spanning-tree
link-type
{
auto
|
point-to-point
|
shared
}
no spanning-tree link-type
•
auto
- Automatically derived from the duplex mode setting.
•
point-to-point
- Point-to-point link.
•
shared
- Shared medium.
Default Setting
auto
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• Specify a point-to-point link if the interface can only be connected to
exactly one other bridge, or a shared link if it can be connected to two
or more bridges.
• When automatic detection is selected, the switch derives the link type
from the duplex mode. A full-duplex interface is considered a
point-to-point link, while a half-duplex interface is assumed to be on a
shared link.
• RSTP only works on point-to-point links between two bridges. If you
designate a port as a shared link, RSTP is forbidden.
Example
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree link-type point-to-point
Console(config-if)#
Summary of Contents for 6724AL2
