PROFIBUS DP communication module
9.12 Data sets (BS)
3RW44 soft starters
Manual, 03/2017, NEB535219502000/RS-AB/008
193
The following messages can be entered:
Table 9- 22 Messages in the logbook - Reading events
ID
No.
Events - messages
Note
Warnings
324 Temperature sensor overload
± (coming/going event)
325 Temperature sensor wire break
± (coming/going event)
326 Temperature sensor short-circuit
± (coming/going event)
327 Thermal motor model overload
± (coming/going event)
334 I
e
current limit exceeded
± (coming/going event)
335 I
e
current limit undershot
± (coming/going event)
340 Asymmetry detected
± (coming/going event)
342 Ground fault detected
± (coming/going event)
Actions
310 Emergency start active
± (coming/going event)
357 Automatic mode
+ (coming event only)
358 Manual bus mode
+ (coming event only)
359 Manual mode local
+ (coming event only)
360 Connection abort in manual mode
+ (coming event only)
363 Maximum pointer deleted
+ (coming event only)
365 Invalid parameter value
+ (coming event only)
ID No. of incorrect parameter
366 Parameters cannot be changed in ON state
+ (coming event only)
ID No. of incorrect parameter
368 Parameters disabled CPU/master active
± (coming/going event)
369 Factory settings restored
+ (coming event only)
1302 Logbook - trips deleted
+ (coming event only)
1303 Logbook - events deleted
+ (coming event only)