manualshive.com logo in svg

Siemens SIRIUS 3RH Series, System Manual

Share
Download
Siemens SIRIUS 3RH Series System Manual Download Page 118

SIRIUS 3RT2 contactors/contactor assemblies 

 

2.4 Configuration 

 

SIRIUS Innovations 

118

 

System Manual, 01/2011, A8E56203870002-03 

2.4.3

 

Application environment 

2.4.3.1

 

3RH2 contactor relays 

The following information must be taken into account when planning applications involving 

3RH2 contactor relays. 

Degree of protection and resistance to extreme climates 

3RH2 contactor relays are suitable for use in any climate. They are safe to touch according 

to DIN EN 50274. The 3RH2 contactor relays have IP20 degree of protection. The drive 

system for the 3RH2 contactor relays has IP40 degree of protection. 

Shock load and vibratory load 

The 3RH2 contactor relays have been tested in terms of their shock resistance to sine 

pulses and rectangular pulses for AC and DC operation. 

Ambient temperature 

The 3RH2 contactor relays are dimensioned for operation at ambient temperatures of 

between -25 °C and +60 °C. The devices can be stored at temperatures within the range 

from -55 °C to +80 °C. 

Reference 

 

More information ... 

Can be found in the chapter titled ... 

About the environments in which contactor relays 

are used 

General data, rated data (CSA and UL), and data 

relating to short-circuit protection for 3RH2. 

contactor relays (Page 272) 

 

2.4.3.2

 

3RT2 power contactors 

The following information must be taken into account when planning applications involving 

3RT2 power contactors. 

Degree of protection and resistance to extreme climates 

3RT2 power contactors are suitable for use in any climate. They are safe to touch according 

to DIN EN 50274. The 3RT2 contactors have IP20 degree of protection. The drive system for 

the 3RT20 contactors has IP40 degree of protection. 

Shock load and vibratory load 

The 3RT2 contactors have been tested in terms of their shock resistance to sine pulses and 

rectangular pulses for AC and DC operation. 

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands