Siemens SIRIUS 3RH Series System Manual Download Page 430

Page: 430 / 786

SIRIUS 3RV2 motor starter protectors

4.9 Accessories

SIRIUS Innovations

430

System Manual, 01/2011, A8E56203870002-03

Step

Operating instruction

5 / 6

Mount a DIN rail in the center of the base of the door-

coupling rotary operating mechanism. Attach the

deactivated motor starter protector to the DIN rail from

above and snap the motor starter protector onto the

DIN rails.

7 / 8

Replace the cover on the base of the door-coupling

rotary operating mechanism. When doing this, make

sure that the motor starter protector is set to "OFF" and

that the shaft slot is on the right.

Opening the door

To open the control cabinet door, set the motor starter protector to O. This will release the

extension shaft from the rotary operating mechanism so that you can open the door.

Opening the door with significant force

Note
Opening the door with a force of ≥ 800 N when the motor starter protector is set to I can

damage the mechanism beyond repair. The motor starter protector remains active. The

mechanism will keep the door closed up to a force of 800 N.

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands

Siemens SIRIUS 3RH Series, System Manual

Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands