Siemens SIRIUS 3RH Series System Manual Download Page 647

Page: 647 / 786

SIRIUS 3RA28 function modules for mounting on 3RT2 contactors

7.2 Product description

SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03

647

7.2.3.2

Function modules for star-delta (wye-delta) start

Applications

The function module for star-delta (wye-delta) start is used to switch from star (wye) to delta

operation.

Features

The function module for star-delta (wye-delta) start has the following features:
●

All modules with wide control voltage range

●

Integrated varistor (surge suppressor)

●

One module kit for contactor screw-type and spring-loaded connection systems

●

One module kit for both S00 and S0 size contactors (options only with main circuit

connecting comb)

●

Wide voltage range (24 to 240 V AC/DC) and

●

3 selectable time ranges (10 s, 30 s, 60 s)

●

Operating time adjustment from 5 to 100% per time range (corresponds to 0.5 s to 60 s)

●

Changeover delay set to a non-adjustable value of 50 ms

●

Switch position indication for the contactor below in the form of a mechanical switch

position indicator (plunger)

●

Control exclusively via A1/A2 on the line contactor below

●

No further wiring required

The wide voltage and the wide time range ensure advanced use of the function modules.

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands

Siemens SIRIUS 3RH Series, System Manual

Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands