manualshive.com logo in svg

Siemens SIRIUS 3RH Series, System Manual

Share
Download
Siemens SIRIUS 3RH Series System Manual Download Page 610

SIRIUS 3RA21/22 load feeders 

 

6.9 Accessories 

 

SIRIUS Innovations 

610

 

System Manual, 01/2011, A8E56203870002-03 

6.9.2

 

Accessories for starter combinations 

The following accessories are available for starter combinations:  
●

 

Wiring kit for reversing operation 
Electrical and mechanical connection for reversing contactors. Can be combined with link 

module. Integrated electrical and mechanical interlock option. 

●

 

Wiring kit for star-delta (wye-delta) start. 
Electrical and mechanical connection for 3 contactors of the same size. 

●

 

Link module for the electrical and mechanical connection between motor starter protector 

and contactor with screw-type, spring-loaded or hybrid connection system. 

Reference 

 

More information ... 

Can be found in the chapter titled ... 

About the wiring kit for reversing operation 

SIRIUS 3RT2 contactors/contactor assemblies, 

under Assembly kit for reversing contactor 

assemblies (Page 212) 

About wiring kit for contactor assemblies for star-

delta (wye-delta) start 

SIRIUS 3RT2 contactors/contactor assemblies, 

under Assembly kit for contactor assemblies for 

star-delta (wye-delta) start (Page 219) 

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands