Siemens SIRIUS 3RH Series System Manual Download Page 594

Page: 594 / 786

SIRIUS 3RA21/22 load feeders

6.6 Mounting

SIRIUS Innovations

594

System Manual, 01/2011, A8E56203870002-03

Mounting with a DIN rail adapter is also possible.

NOTICE

Vibration or shock load on size S00 reversing starters
In the case of vibration or shock load (such as in railway applications, for example), the

fuseless load feeder (size S00 reversing starter) has to be mounted on a DIN rail adapter to

protect the individual devices against damage.

Figure 6-1

Mounting on DIN rail without adapter

6.6.3.2

On DIN rail with DIN rail adapter

All feeders can be mounted on DIN rails with DIN rail adapters.

CAUTION

Possible damage to load feeder.
If the load feeder is mounted directly on the DIN rail without a DIN rail adapter, there is no

guarantee that the fastening will be vibration-proof.
Size S0 reversing starters have to be mounted with DIN rail adapters. However, DIN rail

adapters can be omitted when using busbar adapters.

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands

Siemens SIRIUS 3RH Series, System Manual

Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands