manualshive.com logo in svg

Siemens SIRIUS 3RH Series, System Manual

Share
Download
Siemens SIRIUS 3RH Series System Manual Download Page 202

SIRIUS 3RT2 contactors/contactor assemblies 

 

2.7 Accessories 

 

SIRIUS Innovations 

202

 

System Manual, 01/2011, A8E56203870002-03 

2.7.17

 

Link module for two contactors in series 

2.7.17.1

 

Description 

The link module for 2 contactors in series is a module used to connect two contactors in 

series. It is used in Safety applications, for example, where two switching points located in 

series are required. 
The link module for 2 contactors in series is available in the following versions. 

Table 2- 55  Versions of the link module 

Size 

Order number 

S00 

3RA2916-1A 

S0 

3RA2926-1A 

2.7.17.2

 

Mounting 

Table 2- 56  Mounting the link module for 2 contactors in series (size S00) 

Step 

Operating instruction 

Image 

1 

Insert the pins of the link module into the 

contactor's terminal openings from above 

until they are securely in position. Make 

sure that the wedge (a) engages in the 

groove (b) provided on the contactor for this 

purpose. 

D

E

 

2 

Attach the contactor onto the link module's 

pins from above. 

 

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands