Siemens SIRIUS 3RH Series System Manual Download Page 641

Page: 641 / 786

SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03

641

SIRIUS 3RA28 function modules for mounting on
3RT2 contactors

7.1

Standards

Applicable regulations, standards, and approvals

The following general regulations and standards apply for the 3RA28 timing relay:

General regulations

Explanation

IEC 61812-1/DIN VDE 0435 Part 2021

Electrical relays, timing relays

IEC 61000-6-2/IEC 61000-6-4

Electromagnetic compatibility

IEC 60947-5-1; DIN VDE 0660 Part 200

Low-voltage switchgear and controlgear

IEC 60721-3-1 / -3

Environmental conditions

IEC 60529

Degree of protection

CE/UL/CSA/CCC/C-Tick/shipbuilding approval

The timing relays have UL and CSA approval for

use all over the world. They have also been

prototype-tested by the GL, LRS, and DM

shipbuilding companies.

Approvals/Test reports

Confirmation of approvals, along with test certificates and declarations of conformity, can be

obtained on the Internet from Technical Assistance (

Reference

The standards from Catalog LV 1 "Low-Voltage Controls and Distribution SIRIUS -

SENTRON - SIVACON" in the appendix always apply. You will find extracts from the most

important standards relating to the SIRIUS modular system in the chapter titled System

overview, under Standards (Page 23).

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands

Siemens SIRIUS 3RH Series, System Manual

Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands