Siemens MAG 1100, Operating Instructions Manual, Page: 293 / 665

7ML19981FB05 MultiRanger 100/200 – INSTRUCTION MANUAL Page 119
mmm
mm
Pa
ra
m
e
te
rs
P000 Lock
Secures the MultiRanger from changes.
Access this parameter directly (type
000
) and enter any value (except 1954) to secure
programming lock. To unlock the MultiRanger, access this parameter and enter
1954
.
Quick Start (P001 to P007)
P001 Operation
Sets the type of measurement required for the application.
Primary Index
Global
Values
1954 * OFF (programming permitted)
-1
Simulation Controls (relays energize based on simu-
lated level)
other lock activated (programming secured)
Related
• Simulation on page 85
WARNING:
Use this lock as backup security only. It uses a fixed value which can
be discovered by unauthorized personnel.
Primary Index
Single Point Model Dual Point Model
Global Transducer
Values
0 Out-of-service
1 Level – how full the vessel is (MR 200: volume – P050)
2 Space – how empty the vessel is (MR 200: ullage – P050)
3 * Distance – distance from transducer to material
4 DPD – dual point difference [MR 200]
5 DPA – dual point average [MR 200]
6 OCM – flow rate in an open channel [MR 200]
7 Pump Totalizer – total pumped volume [MR 200]
Alters
• P600 Primary Measuring Device