Siemens MAG 1100, Operating Instructions Manual, Page: 143 / 665

68
SITRANS F M 8. Commissioning
5HOD\
'LJLWDORXWSXW
%DWFK
3XOVH
)UHTXHQF\
(UURUOHYHO
(UURUQXPEHU
'LUHFWLRQOLPLW
2II
%DWFKTXDQWLW\ %DWFKFRPS
%DWFKWLPHHUURU
2II
2II
2Q
%DWFKRYHUUXQHUU
2II
2II
2Q
%DWFKRYHUUXQHUU
%DWFKFRXQWHU
'RZQ
8S
'RZQ
%DWFK
7LPHFRQVW 0D[EDWFKWLPH
5HOD\RXWSXW
&OHDQLQJ
(UURUOHYHO
(UURUQXPEHU
'LUHFWLRQ/LPLW
&OHDQLQJ
&OHDQLQJ
2II
&OHDQLQJ
F\FOHWLPH
'LJLWDORXWSXW
5HOD\RXWSXW
'LUHFWLRQOLPLW
(UURUOHYHO
(UURUQXPEHU
'LUHFWLRQOLPLW
2II
/LPLWPRGH
VHWSRLQW
VHWSRLQW
VHWSRLQWV
/LPLWVHWSRLQW
/LPLWVHWSRLQW
PLQLPXP
/LPLWVHWSRLQW
PD[LPXP +\VWHUHVLV
Menu detail
Limit/direction
Limit switches are available for both digital and relay outputs.
Direction mode: 1 set point at 0% flow; hysteresis 5%.
If 2 set points must activate 2 separate outputs, a single set point has to be selected individually for
digital as well as relay outputs.
Batch
(MAG 6000 only) Non CT
(Possible through relay and
digital output)
8.4.4
Relay outputs
Cleaning
7RWDOL]HUUHVHW
7RWDOL]HU
)RUFHRXWSXW
7RWDOL]HU
7RWDOL]HU
7RWDOL]HU
([WHUQDOLQSXW
2II
6WDUWEDWFK
+ROGFRQWLQXH
6WRSEDWFK
7RWDOL]HUUHVHW
)RUFHRXWSXW
)UHH]HRXWSXW
4PD[QLJKW
0DQXDOFOHDQLQJ
2II
([WHUQDOLQSXW
8.4.5
External input
Non CT versions only
Batch control is available on MAG 6000 only.
The relay output must always be used to operate the cleaning unit when a cleaning unit has been
installed together with the transmitter. The relay output cannot be used for other purposes.
Note
When batch function is on relay - the pulse/frequency output is not possible.