manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 96 / 197

Share
Download
Siemens 300 Series User Manual Download Page 96

3–32

ROLMphone 300/600 User Guide

pressing the line key or the SPEAKER key. If 
this party is the last one in the multiple line 
appearance, the call is disconnected.

Two-Way Speaker Call

The Two-Way Speaker Call feature lets you make a 
two-way call to the speaker of another telephone. If 
the other party does not have a speakerphone, they 
must pick up the handset to answer.

To make a two-
way speaker call

➩

Press the Two-Way Speaker Call (SPK2WAY) 
key.

➩

Dial the extension.

You will hear a single beep. The other party will 
hear a double beep.

➩

Begin speaking. If the other party does not have 
a speakerphone, they must pick up the handset 
to answer. You and the other party will hear 
single beeps periodically until the other party 
picks up the handset.

To make a two-way call to the speaker of a telephone 
within your com group, use the Intercom Call feature. 
(See “Community (Com) Group Speaker Call” on 
page 3–19.)

You can make a two-way speaker call to a DSS exten-
sion by pressing the Two-Way Speaker Call 
(SPK2WAY) key and then pressing the DSS key. 
(See “Direct Station Select (DSS)” on page 3–12.)

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments