manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 48 / 197

Share
Download
Siemens 300 Series User Manual Download Page 48

2–10

ROLMphone 300/600 User Guide

External Calls

Calling an Outside Number

To call outside your CBX system, you must first dial 
your trunk (outside line) access code before dialing 
the number you want to reach.

If all trunks are busy when you make your call, you 
will hear a fast busy tone. If your system has queuing, 
you will receive the queuing tone and can then use 
Trunk Callback Queuing or Trunk Standby Queuing 
to wait for the next available trunk. See “Trunk Call-
back Queuing” on page 3–40 and “Trunk Standby 
Queuing” on page 3–41.

In this guide, 9 is used as the access code for a trunk. 
Your CBX system administrator can tell you your 
trunk access code.

Your system’s trunk access code _______.

Your system may also prompt you to enter a personal 
identification number (PIN) to make an external call. 
See “Personal Identification Number (PIN)” on page 
1–14 and “Forced Authorization” on page 7–18.

To call an 
outside number

➩

Get a dial tone.

➩

Dial 9.

➩

Listen for the external dial tone.

➩

Dial the outside number.

➩

If your system prompts you for a PIN, enter 
your PIN.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments