manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 55 / 197

Share
Download
Siemens 300 Series User Manual Download Page 55

 Using Your Phone

2–17

2. U

sing
 You

r P

hone

Hold

Putting a Call on Hold

The Hold key lets you temporarily hang up a line 
without disconnecting the other party. If you do not 
retrieve the call after a certain period of time (deter-
mined by the CBX), your telephone rings. If it is an 
external call and you do not answer, the call is trans-
ferred to the operator.

If you want to make another call after placing a call on 
hold, you must use another line. If your telephone has 
only one line, use the consultation feature to place an-
other call. (See “Consultation” on page 3–11.)

To put a call on 
hold

➩

Press the HOLD key.

➩

If you were using the handset, you can hang up.

The status light beside the line key flashes to 
remind you that the call is on hold, and the CBX 
will call you back after a certain period of time. 
You can put only one call on hold per line.

To reconnect to 
the call

➩

Press the line key next to the flashing status 
light, or pick up the handset and press the line 
key.

To pick up a call 
on hold at 
another 
extension

➩

Press the PICKUP key, or get a dial tone and 
dial * 3.

➩

Dial the number of the extension at which the 
call was placed on hold.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments