manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 61 / 197

Share
Download
Siemens 300 Series User Manual Download Page 61

 Using Your Phone

2–23

2. U

sing
 You

r P

hone

Using Your Mailbox

The Mailbox feature lets you receive and answer re-
minder messages and PhoneMail and ROLMfax noti-
fications. It also lets you leave reminder requests at 
other extensions.

Messages and notifications will turn on the status 
light beside your Mailbox key and, on display tele-
phones, provide information about the call.

Note

On a non-display telephone, you can receive only one 
message or notification at a time.

If you have a non-display telephone with a PhoneMail 
(PHMAIL) key, the status light for that key, instead of 
the one for the Mailbox key, will turn on when you 
have a PhoneMail message.

To leave a 
reminder 
message

➩

Press the MAILBOX key or dial # * 1 after re-
ceiving a busy signal or getting no answer.

The Mailbox status light on the telephone of the 
party you called turns on steadily. If that 
telephone has a display, the system leaves a 
reminder message providing your name and the 
date and time of your call.

To display a mes-
sage or notifica-
tion on a display 
telephone

➩

Press the MAILBOX key.

➩

Press it again to scroll through multiple 
messages and notifications until the one you 
want is displayed.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments