Siemens 300 Series User Manual Download

Page: 155 / 197

Managerial Features

7–17

7. M

anager

ial Featu

res

– # 9 5

Forward both internal and external calls
when your extension is either busy or you do
not answer within a period of time specified
at the CBX.

– # 9 6

Forward both internal and external calls
when you do not answer within a period of
time specified at the CBX.

You will hear the confirmation tone, followed
by the internal dial tone.

➩

Dial the extension, or dial 9 and the outside
number, to which you want your calls to be
forwarded.

You will hear the confirmation tone.

➩

Hang up.

To cancel your
Variable
Forwarding
target from
another phone

➩

Get a dial tone.

➩

Dial * # 5 7.

➩

Dial your PIN.

You will hear the confirmation tone, followed
by the internal dial tone.

➩

Dial # # 9 1.

You will hear the confirmation tone.

➩

Hang up.

Note

For more information, see “Variable Forwarding” on
page 5–4.

Summary of Contents for 300 Series






































































































































































































Search results

Summary of Contents for 300 Series

Reviews:

Related manuals for 300 Series

Brands by name

Popular brands

Siemens 300 Series, User Manual

Search results

Summary of Contents for 300 Series

Reviews:

Related manuals for 300 Series

Brands by name

Popular brands