manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 125 / 197

Share
Download
Siemens 300 Series User Manual Download Page 125

 Moving Calls

5–9

5. Movin

g

 Calls

➩

Dial the extension to which you want your calls 
forwarded. For all-condition forwarding (# 9 1, 
# 9 2, # 9 3), you can dial 9 and an outside num-
ber as your forwarding target.

If your telephone has a FORWARD key, the 
FORWARD status light turns on to 
indicate that Variable Forwarding is active for 
your extension. If you have a display telephone, 
STORED is displayed, followed by the option 
you chose and the number to which your calls 
are forwarded.

You will hear the confirmation tone.

➩

Hang up. Your primary line key status light 
flickers.

Note

A call made from your Variable Forwarding target to 
your extension will always ring through.

You can only forward calls to an outside number if 
your telephone has been assigned a special class of 
service.

To cancel 
Variable 
Forwarding

➩

Press the FORWARD key. Your primary line 
key status light and the FORWARD status light 
turns off. If you have a display telephone, the 
forwarding option and the number to which 
your telephone was previously forwarded is 
displayed, followed by OFF.

OR

➩

Get a dial tone.

➩

Dial # # 9 1.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments