manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 34 / 197

Share
Download
Siemens 300 Series User Manual Download Page 34

1–20

ROLMphone 300/600 User Guide

Sounds

Your phone makes different sounds to let you know 
what’s going on. Rings occur on a line that you are not 
using and indicate that you have an incoming call. 
Tones occur while you are using your phone and pro-
vide information about calls and features.

Sound

Meaning

Rings

Single (repeated)

Internal call

Double (repeated)

External call

Triple (repeated)

Callback

Long (repeated)

Intercom call or hunt group call

Single beep

Forwarded call; also used in 
connection with DSS extensions 
and intercom features.

Triple beep

DSS call

Continuous

Emergency call

Tones

Broken dial tone, inter-
rupted every 1/2 sec.

Your phone is in Do Not Disturb 
or Forwarding mode.

Broken dial tone, inter-
rupted every 1 1/2 sec.

A reminder message or Phone-
Mail or ROLMfax notification 
is waiting.

Busy tone

The party you called is on the 
phone.

Busy tone that changes 
to a very fast busy tone

You cannot queue for the party 
you called.

Dial tone

You can make a call or invoke a 
feature.

Fast busy tone

Invalid call

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments