manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 73 / 197

Share
Download
Siemens 300 Series User Manual Download Page 73

 Making Calls

3–9

3. Making

 C

alls

Conference

The Conference feature lets you have up to eight par-
ties, including yourself, in a telephone conversation. 
The other parties besides yourself can be on trunks 
(outside lines). Any party can leave the conference by 
hanging up.

To set up a 
conference

➩

During a conversation, press the TRANSFR 
key to put the party on consultation hold.

You will hear the confirmation tone, followed 
by the internal dial tone.

➩

Dial the extension you want to add, or dial 9 and 
the outside number.

➩

After the party answers, press the Conference 
(CONF) key to join all the parties. All parties 
will hear a conference tone to signal that 
another party has joined the call.

Or, if the party does not want to join the 
conference, press the CONNECT key, which 
will return you to the conference.

Note

If you do not have a Conference key on your 
telephone, press the TRANSFR key to join all 
parties.

➩

To add another party, press the TRANSFR key 
and dial the next party, then press CONF to join 
all the parties. Everyone in the call will hear a 
conference tone to signal that a new party has 
joined the call.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments