manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 31 / 197

Share
Download
Siemens 300 Series User Manual Download Page 31

 Introduction

1–17

1. Int

rod
uction

Feature Access Codes

Since a set of features has already been assigned to 
your telephone’s feature keys, you may find that your 
telephone does not have feature keys for some of the 
features described in this guide. However, you can 
still use any of these features that are available on 
your system and permitted by your class of service by 
dialing that feature’s access code, if it has one.

Throughout the remainder of this guide, the steps de-
scribed for using each of the system features include 
the feature key you press to access a feature and the 
feature code you can dial if you do not have that fea-
ture key. If you need to know a particular feature 
access code in a hurry, see “Feature Access Codes” on 
page A–1, which lists these codes alphabetically.

Note

You must have a dial tone before entering a feature 
access code. If you do not have a dial tone, press the 
Transfer key to get one.

The feature access codes listed in this guide are the 
defaults that come with your system. However, your 
CBX system administrator can configure them 
differently to suit your company’s requirements.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments