manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 126 / 197

Share
Download
Siemens 300 Series User Manual Download Page 126

5–10

ROLMphone 300/600 User Guide

You will hear the confirmation tone. If your 
telephone has a FORWARD key, the 
FORWARD status light turns off. 

If you have a display telephone, the forwarding 
option and the number to which your telephone 
was previously forwarded are displayed, 
followed by OFF.

➩

Hang up. Your primary line key status light 
turns off.

Other Forwarding Options

Follow-Me Forwarding

Follow-Me Forwarding lets you enter a personal 
identification number (PIN) from any internal tele-
phone and then specify how calls to your extension 
are to be forwarded, using Variable Forwarding. For 
example, you can use it to have your calls follow you 
from one office to the next. For information on how to 
use do this, see “PIN Authorization Features” on page 
7–14.

Forced Forwarding

Forced Forwarding lets you immediately forward a 
call ringing on your telephone by pressing the 
Forward key. The call is forwarded to the same exten-
sion to which calls are normally fixed forwarded 
when your extension rings but no one 
answers.

To force forward 
a call

➩

While your telephone is ringing, press the 
FORWARD key. If you have a display tele-
phone, CALL FORWARDED is displayed.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments