manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 94 / 197

Share
Download
Siemens 300 Series User Manual Download Page 94

3–30

ROLMphone 300/600 User Guide

One-Way Speaker Call

The One-Way Speaker Call feature lets you make a 
one-way call to the speaker of another phone. If the 
other party does not have a speakerphone, they must 
pick up the handset to answer.

Note

One-Way Speaker Call is only available on CBX 
Release 9006.3 and higher.

To make a one-
way speaker call 

➩

Press the One-Way Speaker Call (SPK1WAY) 
key.

➩

Dial the extension.

You will hear the confirmation tone. The other 
party will hear a double beep.

OR

➩

Get a dial tone.

➩

Dial # 8 1.

You will hear the confirmation tone, followed 
by a dial tone.

➩

Dial the extension.

You will hear a confirmation tone. The other 
party will hear a double beep.

➩

Begin speaking. The other party must pick up 
the handset to answer and will hear single beeps 
periodically until they do or until you hang up.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments